Grow Tent 90*90*180cm

Grow Tent 9090180cm (363672inch)

Our 90×90×180cm grow tent delivers professional-grade performance for serious growers. The 600D Oxford nylon exterior resists tears, water, and wear, while the 340G PE lightproof barrier locks in your grow cycle and blocks all external light leaks. Inside, 100% reflective diamond mylar maximizes light efficiency, and the 16mm diameter steel poles provide unshakable stability for your lights, fans, and filters. Build a controlled, high-yield growing space that stands the test of time.

Grow Tent Size
Frame Material
Outer Layer Material
Middle Layer Material
Inner Layer Material
Frame Diameter
Zipper

90*90*180cm (36”*36”*72”)
Stainless Steel
600D Oxford Nylon Fabric
PE Lighting Proof
100% Reflective Dimond Mylar
16mm
SBS Zipper

Multi-Layer Shield

16mm Diameter Poles

SBS Zipper

Mounting

1. Prep Parts

Gather all metal poles and plastic connectors.

2. Build Base Frame

Connect poles to form a square/rectangular bottom frame.

3. Add Vertical Poles

Insert height poles into the base connectors, ensuring they are secure.

4. Attach Top Frame

Build a matching top frame and connect it to the vertical poles.

5. Check Stability

Shake the frame gently to confirm all joints are tight. Ready for the tent cover.

1. Frame Mounting

Unpack and verify all metal poles and plastic connectors are present.
Assemble the poles and connectors to build a stable cube/rectangular frame, as shown.

2. Shell Covering

Unzip all zippers on the tent shell to fully open it.
Lift the tent shell and drape it over the top of the assembled frame, letting it fall into place.

3. Finishing

Pull the bottom edges of the tent shell down to cover the entire base of the frame.
Secure the hanging bars (for lights/accessories) onto the top frame.
Close all zippers to ensure a snug, light-tight fit.